Freestanding Wall Units: Fixture Finder: OPTO International Ltd.

Important Notes About Freestanding Walls

Freestanding Walls must be properly supported.

Many OPTO Wall Systems must be attached to a wall.

		Home \| Contact Us \| Events \| Technical Info \| Tour-a-Store \| Fixture Finder


		Gondola Units \| 2/3/4-Way Units \| Feature Units \| Graphic Displays \| Cash Wraps / Retail Counters Tables/Cubby Units \| Mounted Wall Units \| Freestanding Wall Units \| Accessories

THE OPTIONS COLLECTION

The OPTO Freestanding Wall system is the perfect solution for temporary spaces or for applications where wall mounting is undesirable. Panels are available in 2159mm , 2591mm, 2921mm , and 3353mm H configurations.

You can accessorise your Freestanding Wall like any other Options Collection unit with OPTO's full line of accessories, giving you complete flexibility in merchandising. (See Important Notes.)

Freestanding Wall units are stationary once built and cannot be placed on casters.

3-Module (2-2-2) Freestanding Wall

Please see Important Notes about Freestanding Walls at the bottom of this page.

Units

A	3-Module (2-4-2) Freestanding Wall	3-Module (2-2-2) Freestanding Wall

B	8-Module Freestanding Curved Wall	5-Module (2-2-2-2-2) Freestanding Wall

C	3-Module (4-4-4) Freestanding Wall

The 'Options'^® Collection is a registered trademark of OPTO International Limited.

©2005 OPTO International Limited
Tel: 0161-330-9136 • Fax: 0161-343-7332 • options@optoint.co.uk

Important Notes About Freestanding Walls

Freestanding Walls must be properly supported.
OPTO Freestanding Wall Systems are designed to allow greater flexibility in retailing, but it's important to understand the physics of such a feat.
All wall systems, freestanding or mounted, must be properly supported to avoid fixture failures. With a freestanding wall, this can be accomplished in several ways, including support fins (both front and rear locations, depending on fixture load), installing the freestanding wall in a curve, or with perpendicular sections.

Contact an OPTO designer to discuss your freestanding wall needs. We will ensure you receive a proper setup.

Many OPTO Wall Systems must be attached to a wall.
Most retail wall solutions offered by OPTO bust be directly attached to a wall or soffit. Wall systems requiring mounting include Perimeter Wall system, Post Wall system, Basics Wall system, and Ceiling/Floor Mounted Post Wall system.
Wall systems shown on this page represent some examples of Freestanding Wall solutions. You can customize any of these solutions to fit your space, match your style, and show your merchandise.