Frame & Accessory Colors | Panel & Shelving Materials | OPTO Recommendations
Counter System | Wall Systems | Connector System

The Options Collection offers four different systems for merchandising your walls. Depending on your store's construction, retail style or budget, one system may be more suitable than the others.

Browse through this detailed information on each wall system to determine which is best for your retail application. Pay close attention to mounting requirements, system flexibility and weight considerations.

If you need more assistance in choosing the right wall system, you may wish to plan a visit to our showroom to get a first-hand look at each option.
Limited Editions for Her (+)
To view pre-configured OPTO Wall Systems, please visit the Fixture Finder section on Mounted Wall Units.
Perimeter Wall System

General Information

The Perimeter Wall system is elegantly designed, incredibly flexible and quite strong. Installation is simple: wall uprights install into pre-notched wall angles that can me mounted to almost any wall surface.

Usage

Because of its mounting design, the Perimeter Wall system can be mounted to almost any straight wall surface including drywall, concrete or brick. When mounting to drywall, use 1x4" wood blocking in front of your wall to mount to studs. The Perimeter Wall angle will then completely hide the wood blocking, eliminating the need to block your wall from behind.

Flexibility

Designed to accommodate OPTO's full line of 24"W and 48"W accessories, including Standard, Rail, Post, and Perforated Panel accessories (with optional back panels). Perimeter Wall uprights can be spaced apart at either 25" or 50" O.C. and can be moved without removing any mounting hardware from the wall.

Perimeter Wall uprights are available in 7'-1" and 8'-6" heights, with 30", 36", 42" and 48" upright extensions available.

Installation

Installation is simple. Perimeter Wall angles are mounted to the wall, and wall uprights snap into place.

Specifying

To figure how many Perimeter Wall modules will fit in your space, use the following formulas. A "module" refers to the merchandising wall span between two uprights.
  • For 25" module applications, take the length of your wall in inches, subtract 6, and divide by 24.875.
  • For mixed-module applications, use the formula above and count each 50" module as two 25" modules.
  • For 50" module applications, take the length of your wall in inches, subtract 6, and divide by 49.75.

48"-wide accessories can be used in both 25" and 50" modules. When used on 25" modules, the 48"-wide accessories will span over the middle wall upright. 24"-wide accessories can only be used on 25" modules. Also, Post accessories can be attached to a single upright, creating a focal shelf.

View generic Perimeter Wall installation drawings (pdf)
Classic Post Wall System

General Information

The Classic Post Wall system is perfect for retail spaces with different wall types in the same space. More flexible than the Perimeter Wall system to design with, this system is less flexible after installation.

Usage

The Classic Post Wall system can be mounted in multiple applications including floor-to-ceiling, floor-to-soffit, straight wall, curved wall, or as an outrigger wall. Proper wall blocking or anchoring hardware is required and varies with wall substrates.

Flexibility

Designed to accommodate OPTO's full line of 24"-wide and 48"-wide accessories, including Standard, Rail, Post, and Perforated Panel accessories (with optional back panels). In outrigger, floor-to-ceiling and floor-to-soffit applications, additional Center-Mount Post accessories can be utilized for two-sided merchandising. Wall uprights are mounted in fixed locations which are specified at design time. Special considerations can be made with this system, including ceiling height and window restrictions.

Classic Post Wall uprights are available in 8'-6" and 7'-1" heights, but can be customized to different lengths if necessary.

Installation

Each Classic Post Wall upright is mounted individually using (6) mounting screws. Proper wall anchoring is required and varies depending on wall substrate.

Specifying

To figure how many Classic Post Wall modules will fit in your space, use the following formulas. A "module" refers to the merchandising wall span between two uprights.
  • For 25" module applications, take the length of your wall in inches, subtract 5, and divide by 25.
  • For mixed-module applications, use the formula above and count each 50" module as two 25" modules. (Mixed-module applications are not applicable with Center-Mount Post accessories and some curved walls.)
  • For 50" module applications, take the length of your wall in inches, subtract 5, and divide by 50.

48"-wide accessories can be used in both 25" and 50" modules. When used on 25" modules, the 48"-wide accessories will span over the middle Post Wall upright. 24"-wide accessories can only be used on 25" modules.

When specifying Center-Mount Post accessories, 48"-wide accessories cannot span two 25" modules.

View generic Classic Post Wall installation drawings (pdf)
Edge Post Wall System

General Information

The Edge Post Wall is designed to coordinate with Edge Style units.

Usage

The Edge Post Wall is best suited for focal wall applications, but can also be used in long wall runs. Proper wall blocking or anchoring hardware is required and varies with wall substrates.

Flexibility

Designed to accommodate OPTO's full line of 24"-wide and 48"-wide accessories, including Standard, Rail, Post, and Perforated Panel accessories (with optional back panels). Additional Edge Style accessories coordinate well with this wall system. Wall uprights are mounted in fixed locations which are specified at design time.

Edge Post Wall uprights are available in 8'-6" and 7'-1" heights.

Installation

Each Edge Post Wall upright is mounted individually to the wall using (8) mounting screws. Proper wall anchoring is required and varies depending on wall substrate.

Specifying

To figure how many Edge Post Wall modules will fit in your space, use the following formulas. A "module" refers to the merchandising wall span between two posts.
  • For 25" module applications, take the length of your wall in inches, subtract 5, and divide by 24.75.
  • For mixed-module applications, use the formula above and count each 50" module as two 25" modules. (Mixed-module applications are not applicable with center-mount accessories and some curved walls.)
  • For 50" module applications, take the length of your wall in inches, subtract 5, and divide by 49.5.

48"-wide accessories can be used in both 25" and 50" modules. When used on 25" modules, the 48"-wide accessories will span over the middle Edge Post Wall upright. 24"-wide accessories can only be used on 25" modules. Also, Post accessories can be attached to a single upright, creating a focal shelf.

When specifying Center-Mount Accessories, 48"-wide accessories cannot span two 25" modules.

View generic Edge Post Wall installation drawings (coming soon)
Basics Wall System

General Information

The Basics Wall system is an economical way to merchandise wall space.

Usage

Basics Wall system can be used on any straight wall space. Because all of the weight load is carried on the wall instead of the floor, proper wall anchoring is imperative.

Flexibility

Designed to accommodate most of OPTO's line of 24"-wide and 48"-wide accessories, including Standard, Rail, and Perforated Panel accessories (with optional back panels). Wall uprights are mounted in fixed locations which are specified at design time.

Basics Wall uprights are available in 96" lengths, with 30", 36" and 42" upright extensions available. Uprights can also be customized to different heights if necessary.

Installation

Basics Wall Uprights are mounted directly to the wall. Mounting holes are located every 12" in the upright. Proper wall anchoring is required and varies depending on wall substrate.

Specifying

To figure how many Basics Wall modules will fit in your space, use the following formulas. A "module" refers to the merchandising wall span between two posts.
  • For 25" module applications, take the length of your wall in inches, subtract 3, and divide by 24.
  • For mixed-module applications, use the formula above and count each 50" module as two 25" modules.
  • For 50" module applications, take the length of your wall in inches, subtract 3, and divide by 48.5.

48"-wide accessories can be used in both 25" and 50" modules. When used on 25" modules, the 48"-wide accessories will span over the middle Basics Wall upright. 24"-wide accessories can only be used on 25" modules.

View generic Basics Post Wall installation drawings (pdf)


The 'Options'® Collection is a registered trademark of OPTO International Limited.

©2005 OPTO International Limited
Tel: 0161-330-9136 • Fax: 0161-343-7332 • options@optoint.co.uk